Did you know that painting and drawing are the leading hobbies people invest in today?
After all, people spend around $7.4 billion on these hobbies in the United States alone. Kids’ crafts follow at a close second with $7.31 billion spending each year.
Hobbies are important to ensure that life becomes an enjoyable experience. Some people like expressing themselves with paintings. Others like delving into the history of origami paper folding.
But if you’re an RC car enthusiast, you might want to tackle a more complicated project. One of the ultimate challenges out there is how to build a RC car from scratch. Read on if you want to learn the steps to building an RC car from scratch.
1. Drill the Holes
As a starter project, you can experiment with an index card box. Drill two small holes on the opposite sides. Make sure to do this across from each other, not through the box’s lid.
Ensure that the holes aren’t bigger than the shafts of the motors you’ll use. The reason behind it is to minimize the vibrations that happen during its use. That means your drill bit should be around the 1/8″ or 1/4″ size.
2. Mount the Wheels
There are a lot of places that offer various spare parts for RC cars. There are hobby stores and electronic shops that sell these parts. But if you’re resourceful enough, you can salvage the wheels of other toy cars you might have.
Remove the rubber wheels and thread the shafts of the motor through the holes you drilled. Make sure that you do this from the inside of the index card box. The motor bodies should stay inside the box with the shafts poking out through the holes.
3. Mount the Motors
To mount the motors in their respective positions, use a double-sided sticky tape. Put it under each of them and press it down. Make sure to stay firm so that the connection stays in place.
If you want to know what motors to get, you can check here for more info. They offer a lot of options that can fit your needs. It’s also a good resource to know what to look for in case you have parts lying around.
After all, people spend around $7.4 billion on these hobbies in the United States alone. Kids’ crafts follow at a close second with $7.31 billion spending each year.
Hobbies are important to ensure that life becomes an enjoyable experience. Some people like expressing themselves with paintings. Others like delving into the history of origami paper folding.
But if you’re an RC car enthusiast, you might want to tackle a more complicated project. One of the ultimate challenges out there is how to build a RC car from scratch. Read on if you want to learn the steps to building an RC car from scratch.
1. Drill the Holes
As a starter project, you can experiment with an index card box. Drill two small holes on the opposite sides. Make sure to do this across from each other, not through the box’s lid.
Ensure that the holes aren’t bigger than the shafts of the motors you’ll use. The reason behind it is to minimize the vibrations that happen during its use. That means your drill bit should be around the 1/8″ or 1/4″ size.
2. Mount the Wheels
There are a lot of places that offer various spare parts for RC cars. There are hobby stores and electronic shops that sell these parts. But if you’re resourceful enough, you can salvage the wheels of other toy cars you might have.
Remove the rubber wheels and thread the shafts of the motor through the holes you drilled. Make sure that you do this from the inside of the index card box. The motor bodies should stay inside the box with the shafts poking out through the holes.
3. Mount the Motors
To mount the motors in their respective positions, use a double-sided sticky tape. Put it under each of them and press it down. Make sure to stay firm so that the connection stays in place.
If you want to know what motors to get, you can check here for more info. They offer a lot of options that can fit your needs. It’s also a good resource to know what to look for in case you have parts lying around.
0 comments:
Post a Comment